CRANKCASE AND CRANKSHAFT
9 Shifter operation
9 Transmission operation
Unsmooth operation ¡ Repair.
9 O-ring 1
To crankcase (right) 2.
On the crankcase (right) 1.
Yamaha bond No. 1215
Clean the contacting surface of crankcase (left
and right) before applying the sealant.
9 Dowel pin 1
9 Crankcase (right) 2
To crankcase (left) 3.
9 Fit the crankcase (right) onto the crankcase
(left). Tap lightly on the case with soft hammer.
9 When installing the crankcase, the connecting
rod should be positioned at TDC (top dead
In order to prevent the oil seal lip
being turned up or damaged, wrap a vinyl
tape or the like b b around the right end of
the crankshaft and apply the lithium soap
base grease over the tape.
a a from