Yamaha YZ250(W)/W1 Owner's Service Manual page 452

FRONT FORK
3. Adjust:
9 Front fork top end a
Front fork top end (standard) a a :
Zero mm (Zero in)
4. Tighten:
9 Pinch bolt (handle crown) 1
9 Pinch bolt (under bracket) 2
cC
Tighten the under bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
5. Install:
9 Protector 1
9 Bolt (protector) 2
6. Adjust:
9 Rebound damping force
NOTE:
Turn in the damping adjuster 1 finger-tight and
then turn out to the originally set position.
7. Adjust:
9 Compression damping force
NOTE:
Turn in the damping adjuster 1 finger-tight and
then turn out to the originally set position.
5-41
CHAS
21 Nm (2.1 m•kg, 15 ft•lb)
21 Nm (2.1 m•kg, 15 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)