Displays; Figure 5. Platform Clocking Circuit - Intel ® Core i7 User Manual

Figure 5. Platform Clocking Circuit

3.7.2.12
An on-board battery at BT5G1 maintains power to the real time clock (RTC) when in a
mechanical off state. A CR2032 battery is installed on the motherboard.
Warning: There is a risk of explosion if the lithium battery is replaced by an incorrect type. Dispose
of used batteries according to the vendor's instructions.
3.7.3
The development kit supports the following displays:
1. CRT: A right angled CRT connector has been provided on board (J1A2). Optional
routing to the docking connector is supported through a CRT dock switch (U6C1).
2. LVDS: LVDS support is very similar to the one on earlier platforms. Connector is at
J7D3.
3. HDMI: A HDMI connector (J3A2) is added on-board for the first time. HDMI
connectors are also available on PCI graphics add-in-card.
4. DP: A DP connector (J5A1) has been added on board for the first time. DisplayPort
connectors are also available on PCI graphics add-in-Card.
5. eDP: eDP is available on the PCI graphics add-incard. When used for eDP, this card
needs to be inserted in the PCIe Slot (J5C1) and not in the DDI Slot (J8C2). A 2x5
header (J6D1) is provided for the side-band signals (backlight related information and
SMBUS access).
Dev Kit Manual
Real Time Clocks (RTC)

Displays

®
Intel QM57
Express
Chipset
35 323094