Table of Contents
Advertisement
7.9
Repositioning Joystick
This procedure must be performed by a qualified technician.
1.
Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket.
2.
Remove the joystick from the wheelchair.
3.
Remove the three hex screws that secure both halves of the mounting bracket to the arm tube.
4.
Reposition mounting bracket on opposite arm tube ensuring the threaded plate of the mounting bracket is on the inside of the arm tube as shown
in FIGURE 6.
5.
Using the three hex mounting screws and washers, secure both halves of the mounting bracket to the arm tube.
6.
Slide the joystick mounting tube through the mounting bracket to the desired position.
7.
Turn the adjustment lock lever to secure the joystick mounting tube into the mounting bracket.
Part No 1143192
Mounting Bracket
Hex Mounting
Screws
Adjustment Lock
Washers
Lever
Joystick not shown.
FIGURE 6 Repositioning Joystick
Mounting
Bracket
(Threaded
Plate)
Arm Tube
Joystick
Mounting
Tube
71
7 SETUP/MAINTENANCE
Invacare® Adjustable ASBA Seats
Advertisement
Table of Contents
