Table of Contents
Advertisement
6 ADJUSTMENT
6.3
Adjusting the Height of the Manual Center Mount Footrest
WARNING
While the wheelchair is moving, minimum ground clearance for the front rigging is three inches. If the wheelchair is not moving,
the front rigging MUST maintain a minimum of one inch ground clearance - otherwise personal injury and damage may result.
PINCH POINT EXISTS BETWEEN CENTER MOUNT FOOTREST AND CASTERS - There is limited clearance between
center mount footrest and casters. The user's feet MUST remain on the center mount footrest while operating the wheelchair. If
the user's feet are allowed to rest off the side of the center mount footrest they may come in contact with the caster possibly
resulting in injury.
1.
Remove the two mounting screws that secure the button head cleat
to the extension housing.
2.
Adjust the footrest extension tube to the desired height.
3.
Secure the extension tube to the desired height with the button
head cleat and mounting screws. Securely tighten.
4.
Repeat STEPS 1-3 for the other extension tube.
Invacare® Adjustable ASBA Seats
Button Head
Cleat
Mounting
Screws
FIGURE 7
Adjusting the Height of the Manual Center Mount
56
Extension Housing
Extension Tube Mounting
Holes
Extension
Footrest
Part No 1143192
Advertisement
Table of Contents
