Repositioning The Joystick - Invacare Formula Powered Seating Owner's Operator And Maintenance Manual

SECTION 5—WHEELCHAIR OPERATION

Repositioning the Joystick

NOTE: For this procedure, refer to FIGURE 5.9.
1. Turn the adjustment lock lever to
release the joystick mounting tube from
the mounting bracket.
2. Remove the joystick from the wheelchair.
3. Remove the three hex screws that
secure both halves of the mounting
bracket to the arm tube.
4. Reposition mounting bracket on
opposite arm tube ensuring the
threaded plate of the mounting bracket
is on the inside of the arm tube as
shown in FIGURE 5.9.
5. Using the three hex mounting screws and washers, secure both halves of the mounting
bracket to the arm tube.
6. Slide the joystick mounting tube through the mounting bracket to the desired position.
7. Turn the adjustment lock lever to secure the joystick mounting tube into the mounting
bracket.
Formula™ Powered Seating
All manuals and user guides at all-guides.com
34
Washers
Mounting
Hex
Bracket
Mounting
Screws
Joystick
Adjustment
Mounting
Lock Lever
Tube
FIGURE 5.9 Repositioning the Joystick
Mounting Bracket
(Threaded Plate)
Arm
Tube
NOTE:
Joystick
not
shown.
Part No 1122170