Table of Contents
Advertisement
5 USAGE
Using the CMPJ+ Joystick
For this procedure, refer to FIGURE 3 on page 35.
1.
Make sure the wheelchair is on a level surface.
The drive select toggle switch is located on the left
side, below the LCD. The drive select position is
momentary, meaning that it will return to the
neutral position after a selection is made.
2.
Select a drive that has the Actuator Control Switch Mode icon
displayed.
3.
Select the Actuator Control Switch Mode icon (Detail "A").
4.
Four of the following icons will display when Actuator Control
Switch Mode is selected:
The location of the icons indicates the joystick
direction or quadrant (Detail "B").
The three icons indicate up/down, up or down,
respectively.
Invacare® Adjustable ASBA Seats
ICON
5.
Select the desired operation using the joystick or an equivalent
switch.
While operating the powered seating system, the
selected icon will display on the screen along with
text indicating the current operation (Detail "C").
34
DESCRIPTION
Tilt Operations
Combined Power Leg Operations
Right Leg Operations
Left Leg Operations
No powered seating operation has been
programmed for this quadrant.
Part No 1143192
Advertisement
Table of Contents
