Installing Adjustable Angle Flip-Up Footplates - Invacare Adjustable ASBA Seats User Manual

7.7

Installing Adjustable Angle Flip-up Footplates

1. Slide the half clamp over the footplate hinge.
2. Hand tighten the two flat screws that secure the footplate to the
half clamp.
3. Adjust the footplates to the necessary angle and depth for the user.
Refer to Adjusting Adjustable Angle Flip-Up Footplates on page 54.
Part No 1143192
90° Footrest Support
Flat Screw
Footplate
Half Clamp
Washer
Locknut
Half Clamp
FIGURE 4 Installing Adjustable Angle Flip-up Footplates
69
7 SETUP/MAINTENANCE
Footplate
Hinge
Nylon
Adjustment
Screw
Footplate Hinge
Invacare® Adjustable ASBA Seats