Repositioning Joystick; Adjustable Asba - Invacare Pronto M91 User Manual

11 SETUP/MAINTENANCE

11.14 Repositioning Joystick

Adjustable ASBA

For this procedure, refer to FIGURE 10.

This procedure must be performed by a qualified technician.
1. Turn the adjustment lock lever to release the joystick mounting
tube from the mounting bracket.
2. Remove the joystick from the wheelchair.
3. Remove the three hex screws that secure both halves of the
mounting bracket to the arm tube.
4. Reposition mounting bracket on opposite arm tube ensuring the
threaded plate of the mounting bracket is on the inside of the arm
tube as shown in FIGURE 10.
5. Using the three hex mounting screws and washers, secure both
halves of the mounting bracket to the arm tube.
6. Slide the joystick mounting tube through the mounting bracket to
the desired position.
7. Turn the adjustment lock lever to secure the joystick mounting
tube into the mounting bracket.
Invacare® Pronto® M91™
Mounting Bracket
Hex Mounting
Screws
Adjustment Lock
Washers

Joystick not shown.
FIGURE 10
108
Lever
Repositioning Joystick
Part No 1143153
Mounting
Bracket
(Threaded
Plate)
Arm Tube
Joystick
Mounting
Tube