Adjusting Adjustable Angle Flip-Up Footplates; Depth Adjustment - Invacare Adjustable ASBA Seats User Manual

6 ADJUSTMENT
6.2

Adjusting Adjustable Angle Flip-Up Footplates

Depth Adjustment

For this procedure, refer to FIGURE 4 on page 54.

Observe the angle of the footplate for reinstallation.
The settings for positioning the footplates on the half-
clamps may vary for each footplate.
1. Remove the two flat screws, washers and locknuts that secure
footplate to the half clamp.
2. Move footplate to one of four mounting positions.
 If desired depth is still not obtained, rotate the half
clamp on the footplate hinge 180°.
3. Retighten the two flat screws, washers and locknuts.
Invacare® Adjustable ASBA Seats
90° Footrest Support
Flat Screw
Footplate
Half Clamp
Washer
Locknut
Half Clamp
FIGURE 4 Adjusting Adjustable Angle Flip-Up Footplates
54
Footplate
Hinge
Nylon
Adjustment
Screw
Footplate Hinge
Part No 1143192