Taper; Raising/Lowering Elevating Front Riggings - Invacare Adjustable ASBA Seats User Manual

70° Taper
1. Turn the footrest to the side (open footplate is perpendicular to
wheelchair).
2. Insert footrest mounting pin into mounting tube.
3. Push the footrest towards the inside of the wheelchair until it locks
into place.
The footplate will be on the inside of the

wheelchair when locked in place.
4. Repeat STEPS 1- 3 for the other footrest assembly.
5. To remove the footrest, push the footrest release lever inward,
rotate footrest outward.
6. Adjust footrest height, if desired. Refer to Footrest Height
Adjustment on page 51.
5.5

Raising/Lowering Elevating Front Riggings

1. Perform one of the following:
• Raising - Pull back on the release lever and raise front rigging
to the desired height.
• Lowering - Support front rigging with one hand away from the
release lever. Push release lever downward with other hand.
Part No 1143192
Mounting Tube
Footplate
FIGURE 5 Installing/Removing Footrests - 70° Taper
FIGURE 6 Raising/Lowering Elevating Front Riggings
39
Footrest Mounting
Pin
Footrest
Release
Lever
Release
Lever
Invacare® Adjustable ASBA Seats
5 USAGE