Table of Contents
Advertisement
5 USAGE
This procedure only applies to wheelchairs with Formula PTO Plus or Power Tilt Only seating systems.
Using the Powered Seating Switch
The powered seating switch can be used with all joysticks.
The powered seating switch will alternate functions (increase tilt angle, decrease tilt angle) after it has been released for a
minimum of three seconds.
1.
Make sure the wheelchair is on a level surface.
2.
Press the powered seating switch once to activate the actuator.
3.
Press the powered seating switch again (after at least 3 seconds) to activate the actuator in the opposite direction.
Using the MK6i SPJ+ w/ACC Joystick
For this procedure, refer to FIGURE 2 on page 33.
1.
Make sure the wheelchair is on a level surface.
2.
Press the mode button to switch from driving mode to tilt mode.
The LED will light up with a circle around it.
3.
Move the joystick:
•
Forward - Tilts the seat back.
•
Backward - Tilts the seat upright.
Invacare® Adjustable ASBA Seats
32
Part No 1143192
Advertisement
Table of Contents
