Table of Contents
Advertisement
5.10 Installing/Removing Flip Back Armrests
WARNING
Make sure the flip back armrest release and height adjustment levers are in the locked position before using the wheelchair.
Flip back armrest release lever must be in the unlocked (up-horizontal) position when placing the armrest into the arm
sockets.
Installing
1.
Visually inspect to ensure flip back armrest release lever is in the
unlocked (up-horizontal) position.
2.
Slide the flip back armrest into the arm sockets on the seat frame.
3.
Install the quick-release pin through the rear arm socket and flip
back armrest.
4.
Lock the flip back armrest by pressing the flip back armrest release
lever into the down (vertical) position.
5.
Repeat STEPS 1-4 for the opposite flip back armrest.
Removing
1.
Unlock the flip back armrest by positioning the flip back armrest
release lever into the up (horizontal) position.
2.
Remove the quick-release pin that secures the flip back armrest to
the rear arm socket.
3.
Pull up on the flip back armrest and remove the armrest from the
arm sockets.
4.
Repeat STEPS 1-3 for the opposite flip back armrest, if necessary.
Part No 1143192
Flip Back Armrest
Rear Arm
Socket
Quick-Release Pin
FIGURE 11
45
Flip Back
Locked
Armrest
(Down - Vertical)
Release
Lever
Unlocked
(Up - Horizontal)
Front Arm Socket
Installing/Removing Footrests
Invacare® Adjustable ASBA Seats
5 USAGE
Seat Frame
Advertisement
Table of Contents
