Cpe Bladesystem Configurations With Double-Density Server Blades And An External Control Node; Cpe Bladesystem Configurations With Double-Density Server Blades And A Rack-Mountable - HP Cluster Platform Express v2010 Overview

10. Connection from the OA's external link to an administrative switch (HP ProCurve 2824
switch)
11. Optional connection from the control node's NIC2 port to an external network (such as a
campus network)
12. Optional connection from the control node's iLO port to either an administrative switch or
to an external network (such as a campus network)
Note:
Only one connection from each HP GbE2c switch to the HP ProCurve 2824 switch is required if
the optional InfiniBand network is present.
1.4.6.4 CPE BladeSystem Configurations with Double-Density Server Blades and an External Control
Node
Figure 1-15 shows the connections to an external network when the configuration includes
double-density server blades and a rack-mountable server control node (also referred to as an
external control node).
Figure 1-15 CPE BladeSystem Configurations with Double-Density Server Blades and a
Rack-Mountable Server Control Node
2
3
1
The following list describes the callouts in
30 Cluster Platform Express Overview
15
6
4
6
7
5
16
6
2
8
13
10
14
Figure 1-15:
1 1
12
9