2
Adding encryption targets
FIGURE 45
6. Click Next.
FIGURE 46
60
Select Target dialog box
a. Select a target from the list. (The Target Port WWN and Target Node WWN fields contain all
target information that displays when using the nsshow command.) You can also enter
WWNs manually, for example, to specify a target that is not on the list.
b. Select a target type from the Type list. If the target node is disk storage, choose Disk. If the
target node is tape storage, choose Tape.
The Select Hosts dialog box displays. The dialog box lists all hosts that are in the same fabric
as the encryption engine.
Select Hosts dialog box
Fabric OS Encryption Administrator's Guide
53-1002159-03