Server - Brocade Communications Systems Brocade 8/12c Administrator's Manual

10. Click Sign Request.
11. Enter the required data in the Sign Certificate Request section of the window. Select the CA
12. Paste the copied certificate request data into the Certificate Request box.
13. Click Sign Request.
14. Click Download to download the signed certificate to your local system.
15. Copy the signed certificate data, from -----BEGIN to END...----- lines. Be careful to exclude extra
16. From the Security tab, select Certificates under Certificates & CAs.
17. Select the server certificate name you just created from the certificate list, and select
18. Click Install Certificate.
19. Paste the signed certificate data you copied under Certificate Response and click Save.
Enabling SSL on the Key Management System (KMS) Server
The KMS Server provides the interface to the client. Secure Sockets Layer (SSL) must be enabled
on the KMS Server before this interface will operate. After SSL is enabled on the first appliance, it
will be automatically enabled on the other cluster members.
To configure and enable SSL, complete the following steps:
1. Select the Device tab.
2. In the Device Configuration menu, click KMS Server to display the Key Management Services
Fabric OS Encryption Administrator's Guide
53-1002159-03
name from the Sign with Certificate Authority drop-down list.
The signed certificate request data displays under Sign Certificate Request.
carriage returns or spaces after the data.
Properties.
The Certificate Request Information window displays.
The Certificate Installation window displays.
The status of the server certificate should change from Request Pending to Active.
Configuration window.
Steps for connecting to an SKM or ESKM appliance
2
31