3. Select the container of type Tape for which to display or clear statistics.
4. Click Statistics.
FIGURE 64
5. To clear the tape LUN statistics, select one or more LUNs from the table, and then click Clear.
6. In the confirmation dialog box, click Yes.
7.
Viewing and clearing statistics for specific tape LUNs
To view or clear statistics for tape LUNs in a container, complete these steps:
1. Select Configure > Encryption from the menu task bar.
2. Select a group, switch, or engine from the Encryption Center Devices table that contains the
3. Select a tape target storage device, then click LUNs.
Fabric OS Encryption Administrator's Guide
53-1002159-03
The Tape LUN Statistics dialog box displays. The dialog box lists the statistics for all LUNs that
are members of the selected tape container.
Tape LUN Statistics dialog box
To update the tape LUN statistics, select one or more LUNs from the table, and then click
Refresh.
The Encryption Center dialog box displays.
storage device to be configured, then select Group/Switch/Engine > Targets from the menu
task bar, or right-click a group, switch, or engine and select Targets.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays.
The Target Tape LUNs dialog box displays. The dialog box lists configured tape LUNs.
Tape LUN statistics
2
75