Menu item
Enhance Fine Lines
On
Off
Gray Correction
Auto
Off
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both Directions
Brightness
-6–6
Contrast
0–5
Utilities menu
Menu item
Format Flash
Yes
No
Description
Enables a print mode preferable for files such as architectural drawings, maps,
electrical circuit diagrams, and flow charts
Notes:
•
Off is the factory default setting.
•
To set Enhance Fine Lines from the software program: for Windows users, click
File Print, and then click Properties, Preferences, Options, or Setup, and
change the settings from the Print Quality tab; for Macintosh users, choose File >
Print, and then adjust the settings from the Print dialog and pop-up menus.
•
To set Enhance Fine Lines using the Embedded Web Server, type the network
printer IP address in a browser window, and from Print Settings, click Quality
Menu.
Automatically adjusts the contrast enhancement applied to images
Note: Auto is the factory default setting.
Enables more pixels to print in clusters for clarity, in order to enhance pictures
horizontally or vertically, or to enhance fonts
Note: Off is the factory default setting.
Adjusts the printed output either by lightening or darkening it. You can conserve toner
by lightening the output.
Note: 0 is the factory default setting.
Adjusts the contrast of printed objects
Note: 0 is the factory default setting.
Description
Formats the flash memory. Flash memory refers to the memory added by installing
an optional flash memory card in the printer.
Warning—Potential Damage: Do not turn off the printer while the flash memory
is formatting.
Notes:
•
An optional flash memory card must be installed in the printer and operating
properly for this menu item to be available. The flash memory card must not
be Read/Write or Write protected or defective.
•
No cancels the format request.
•
Yes deletes all data stored in flash memory.
Understanding printer menus
104