Solving Print Quality Problems; Isolating Print Quality Problems - Lexmark E460dw User Manual

4
Press the up or down arrow button until Print Recovery appears, and then press
5
Press the up or down arrow button until Jam Recovery appears, and then press
6
Press the up or down arrow button until On or Auto appears, and then press

Solving print quality problems

The information in the following topics may help you solve print quality problems. If these suggestions still do not
correct the problem, then contact Customer Support. You may have a printer part that requires adjustment or
replacement.

Isolating print quality problems

To help isolate print quality problems, print the print quality test pages, but first make sure the standard tray is loaded:
1
Turn the printer off.
2
Load letter- or A4-size paper in the standard tray. Load the paper stack toward the back of the tray as shown with
the recommended print side facedown. Notice the maximum fill line on the side of the tray to guide you. Do not
overfill the tray.
Print the print quality test pages:
1
Turn the printer off.
2
From the printer control panel, hold down
3
Release the buttons when CONFIG MENU appears.
4
Press the arrow buttons until Prt Quality Pgs appears, and then press
The print quality test pages print.
5
Press the arrow buttons until Exit Config Menu appears, and then press
Resetting the Printer appears briefly, and then Ready appears.
and the right arrow button while turning the printer on.
Troubleshooting
152
.
.
.
.
.