Lexlink Menu; Usb Menu - Lexmark E460dw User Manual

Menu item
Packet Burst
Yes
No
NSQ/GSQ Mode
Yes
No

LexLink menu

This menu is available from the Network/Ports menu:
Network/Ports  Network Menu  Network Setup  LexLink menu
Menu item
Activate
On
Off
View Nickname

USB menu

Menu item
PCL SmartSwitch
On
Off
PS SmartSwitch
On
Off
Description
Reduces network traffic by allowing the transfer and acknowledgement of
multiple data packets to and from the NetWare server
Note: Yes is the factory default setting.
Specifies the NSQ/GSQ Mode setting
Note: Yes is the factory default setting.
Description
Activates or deactivates LexLink support
Note: Off is the factory default setting.
Shows the assigned LexLink nickname
Note: The LexLink nickname can be changed only from the Embedded Web
Server.
Description
Sets the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
•
On is the factory default setting.
•
When the Off setting is used, the printer does not examine incoming data.
•
When the Off setting is used, the printer uses PostScript emulation if the PS
Smartswitch setting is On. It uses the default printer language specified in the
Setup menu if the PS SmartSwitch setting is Off.
Sets the printer to automatically switch to PS emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
•
On is the factory default setting.
•
When the Off setting is used, the printer does not examine incoming data.
•
When the Off setting is used, the printer uses PCL emulation if the PCL
Smartswitch setting is On. It uses the default printer language specified in the
Setup menu if the PCL SmartSwitch setting is Off.
Understanding printer menus
89