Advanced Status; Honor Init - Lexmark E460dw User Manual

Menu item

Advanced Status

Off
On
Protocol
Standard
Fastbytes

Honor Init

On
Off
Parallel Mode 2
On
Off
Mac Binary PS
On
Off
Auto
Parallel with ENA
ENA Address
ENA Netmask
ENA Gateway
Description
Enables bidirectional communication through the parallel port
Notes:
•
On is the factory default setting.
•
The Off setting disables parallel port negotiation.
Specifies the parallel port protocol
Notes:
•
Fastbytes is the factory default setting. It provides compatibility with most
existing parallel ports and is the recommended setting.
•
The Standard setting tries to resolve parallel port communication problems.
Determines whether the printer honors printer hardware initialization requests
from the computer
Notes:
•
Off is the factory default setting.
•
The computer requests initialization by activating the Init signal from the
parallel port. Many personal computers activate the Init signal each time the
computer is turned on.
Determines whether the parallel port data is sampled on the leading or trailing edge
of strobe
Note: On is the factory default setting.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
•
Auto is the factory default setting.
•
The Off setting filters print jobs using the standard protocol.
•
The On setting processes raw binary PostScript print jobs.
•
ENA Address sets the network address information for an external print server
that is attached to the printer using a parallel cable
•
ENA Netmask sets the netmask information for an external print server that is
attached to the printer using a parallel cable
•
ENA Gateway sets the gateway information for an external print server that is
attached to the printer using a parallel cable
Note: Parallel with ENA is available only if the printer is attached to an external print
server through the parallel port.
Understanding printer menus
92