Not Enough Free Space In Flash Memory For Resources; Unformatted Flash Detected; Standard Network Software Error; Standard Parallel Port Disabled - Lexmark E460dw User Manual

52 Not enough free space in flash memory for resources

Try one or more of the following:
•
Press the up or down arrow button until Continue appears, and then press
operation and continue printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
•
Delete fonts, macros, and other data stored in flash memory.
•
Upgrade to a larger capacity flash memory card.

53 Unformatted flash detected

Try one or more of the following:
•
Press the up or down arrow button until Continue appears, and then press
operation and continue printing.
•
Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.

54 Standard network software error

Try one or more of the following:
•
Press the up or down arrow button until Continue appears, and then press
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.

56 Standard parallel port disabled

Try one or more of the following:
•
The printer discards any data received through the parallel port. Press
printing.
•
Make sure the Parallel Buffer menu item is not set to Disabled.

56 Standard USB port disabled

Try one or more of the following:
•
The printer discards any data received through the USB port. Press
•
Make sure the USB Buffer menu item is not set to Disabled.

58 Too many flash options installed

Try one or more of the following:
•
Turn the printer off, and then remove extra flash options:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the excess flash memory.
Troubleshooting
144
to stop the defragment
to stop the defragment
to clear the message
to clear the message and continue
to clear the message and continue printing.