Solid Black Or White Streaks Appear On Transparencies Or Paper; Embedded Web Server Does Not Open; Check The Network Connections; Check The Network Settings - Lexmark E460dw User Manual

Solid black or white streaks appear on transparencies or paper

These are possible solutions. Try one or more of the following:
M
AKE SURE THE FILL PATTERN IS CORRECT
If the fill pattern is incorrect, choose a different fill pattern from your software program.
C
HECK THE PAPER TYPE
•
Try a different type of paper.
•
For transparencies, use only ones recommended by the printer manufacturer.
•
Make sure the Paper Type setting matches what is loaded in the tray or feeder.
•
Make sure the Paper Texture setting is correct for the type of paper or specialty media loaded in the tray or
feeder.
M
AKE SURE THE TONER IS DISTRIBUTED EVENLY IN THE TONER CARTRIDGE
Remove the toner cartridge and shake it from side to side to redistribute the toner to extend the life of the cartridge,
and then reinstall it.
T
HE TONER CARTRIDGE MAY BE DEFECTIVE OR LOW ON TONER
Replace the used toner cartridge with a new one.

Embedded Web Server does not open

These are possible solutions. Try one or more of the following:
C
HECK THE NETWORK CONNECTIONS
Make sure the printer and computer are turned on and connected to the same network.
C
HECK THE NETWORK SETTINGS
Depending on the network settings, you may need to type https:// instead of http:// before the printer IP
address to access the Embedded Web Server. For more information, see your system administrator.
Troubleshooting
161