Loading Trays - Lexmark E460dw User Manual

6
Press the up or down arrow button until
Submitting selection appears, followed by the Universal Setup menu.
7
Press and release
Specify the paper height and width
Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows
the printer to support the size, including support for standard features such as duplex printing and printing multiple
pages on one sheet.
Note: Select Portrait Height to adjust the paper height setting or Paper Width to adjust the paper width
setting, or adjust both. Instructions to adjust both follow.
1
From the Universal Setup menu, press the up or down arrow button until Portrait Width appears, and
then press .
2
Press the left or right arrow button until the setting you want appears, and then press
Submitting selection appears, followed by the Universal Setup menu.
3
From the Universal Setup menu, press the up or down arrow button until Portrait Height appears, and
then press .
4
Press the left or right arrow button until the setting you want appears, and then press
Submitting selection appears, followed by the Universal Setup menu.
5
Press and release
Specify a feed direction
Short Edge is the factory default setting for feed direction for Universal paper settings. The Feed Direction menu
appears only when both the height and width specified for the Universal paper size are set to 8.5 in (216 mm) or less.
If necessary, specify whether the short or long edge of the paper enters the printer first.
1
From the Universal Setup menu, press the up or down arrow button until Feed Direction appears, and then
press .
2
Press the up or down arrow button until Short Edge or Long Edge appears, and then press
3
Press and release

Loading trays

1
Pull the tray completely out.
Note: Do not remove trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
appears next to the correct unit of measure, and then press
until Ready appears.
until Ready appears.
until Ready appears.
Loading paper and specialty media
45
.
.
.
.