HP 6125G Release Note page 32

|<0> Exit
==========================================================================
Enter your choice(0-5):5
Enter an appropriate baudrate option. For example, enter 5 to set the baudrate to 115200 bps.
3.
HP recommends that you change the default baudrate (9600 bps) to a higher baudrate for faster
file transfer before downloading a system software image with XMODEM through the console
port.
Enter 0 to return to the Serial submenu.
4.
Choose an option from 1 to 2. For example, to upgrade the main system software image, enter 2.
5.
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is flash
|<1> Download Application Program To SDRAM And Run
|<2> Update Main Application File
|<3> Modify Serial Interface Parameter
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-3):2
On the configuration terminal, configure the communication settings and transfer the upgrade file.
6.
For more information, see
In this example, when the file transfer is complete, the system sets the file as the main system
software image.
Enter 0 in the Serial submenu to return to the EXTEND-BOOTWARE menu.
7.
Enter 1 in the EXTEND-BOOTWARE menu to run the new system software.
8.
Upgrading system software through an Ethernet port
You can upgrade the system software with FTP or TFTP through an Ethernet port from the Ethernet
submenu.
To update system software through an Ethernet port from the Ethernet submenu:
Enter 3 in the EXTEND-BOOTWARE menu to access the Ethernet submenu.
1.
Enter your choice(0-3):3
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash
|<1> Download Application Program To SDRAM And Run
|<2> Update Main Application File
|<3> Modify Ethernet Parameter
|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
============================================================================
Enter your choice(0-3):
"Using Xmodem through the console
28
port."
|
|
|
|
|
|
|
|
|
|
|
|