Table 23 Network Parameter Fields And Shortcut Keys - HP 6125G Release Note

Table 23 Network parameter fields and shortcut keys

Field
'.' = Clear field
'-' = Go to previous field
Ctrl+D = Quit
Protocol (FTP or TFTP)
Load File Name
Target File Name
Server IP Address
Local IP Address
Gateway IP Address
Select an option in the Ethernet submenu to upgrade a system software image. For example, enter
7.
1 to upgrade the main system software image.
Loading.....................................................................
............................................................................
.........................................Done!
17163940 bytes downloaded!
Updating Basic BootWare? [Y/N]
Enter Y at the prompt to upgrade the basic BootWare section.
8.
Updating Basic BootWare.........Done!
Updating Extend BootWare? [Y/N]
Enter Y at the prompt to upgrade the extended BootWare section.
9.
Updating Extend BootWare.........Done!
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare
|<2> Update Extend BootWare
|<3> Update Basic BootWare
|<4> Modify Ethernet Parameter
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-4):
Enter 0 in the BootWare update menu to return to the BootWare submenu.
10.
Enter 0 in the BootWare submenu to return to the BootWare menu.
11.
Enter 0 in the BootWare menu to reboot the switch with the new BootWare image.
12.
Description
Press a dot (.) and then Enter to clear the setting for a field.
Press a hyphen (-) and then Enter to return to the previous field.
Press Ctrl + D to exit the Ethernet Parameter Set menu.
Set the file transfer protocol to FTP or TFTP.
Set the name of the file to be downloaded.
Set a file name for saving the file on the switch. By default, the target
file name is the same as the source file name.
Set the IP address of the FTP or TFTP server. If a mask must be set, use
a colon (:) to separate the mask length from the IP address. For
example, 192.168.80.10:24.
Set the IP address of the switch.
Set a gateway IP address if the switch is on a different network than
the server.
48
|
|
|
|
|