HP 6125G Release Note page 53

Hp 6125-cmw520-r2106 release notes
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Using FTP through the management Ethernet port
Connect the management Ethernet port of the switch to the PC that stores the target BootWare
1.
image (the IP address of the PC is required), and connect the console port of the switch to the same
or another PC.
Run the FTP server program on the PC connected to the management Ethernet port, specify the file
2.
storage directory, and set the username and password.
NOTE:
The HP 6125 Blade switches are not shipped with FTP server software. Prepare it yourself.
Run the terminal emulation program on the PC connected to the console port. Start the switch, enter
3.
the BootWare menu (see
Enter 7 in the BootWare menu to access the BootWare submenu.
4.
=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash
|<1> Backup Full BootWare
|<2> Restore Full BootWare
|<3> Update BootWare By Serial
|<4> Update BootWare By Ethernet
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-4):
Enter 4 in the BootWare submenu to enter the Ethernet submenu.
5.
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare
|<2> Update Extend BootWare
|<3> Update Basic BootWare
|<4> Modify Ethernet Parameter
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-4):
Enter 4 in the BootWare submenu to configure the network settings.
6.
======================<ETHERNET PARAMETER SET>==============================
|Note:
|
|
============================================================================
Protocol (FTP or TFTP):ftp
Load File Name
Target File Name
Server IP Address
Local IP Address
Gateway IP Address
FTP User Name
Accessing the BootWare menu
'.' = Clear field.
'-' = Go to previous field.
Ctrl+D = Quit.
:test.bin
:main.bin
:test.bin
:main.bin
:192.168.80.20
:192.168.80.10
:0.0.0.0
:UserN
for more information).
49
|
|
|
|
|
|
|
|
|
|
|
|
|
|

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125g/xg

Table of Contents