HP 6125G Release Note page 59

Figure 14 File transfer progress
When the Serial submenu appears after the file transfer is complete, enter 0 at the prompt to return
18.
to the BootWare menu.
Download successfully!
17163940 bytes downloaded!
Updating Basic BootWare? [Y/N]
Enter Y at the prompt to upgrade the basic BootWare section.
19.
Updating Basic BootWare.........Done!
Updating Extend BootWare? [Y/N]
Enter Y at the prompt to upgrade the extended BootWare section.
20.
Updating Extend BootWare.........Done!
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare
|<2> Update Extend BootWare
|<3> Update Basic BootWare
|<4> Modify Ethernet Parameter
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-4):
Enter 0 in the BootWare update menu to return to the BootWare submenu.
21.
Enter 0 in the BootWare submenu to return to the BootWare menu.
22.
Enter 0 in the BootWare menu to reboot the switch with the new BootWare image.
23.
Handling software upgrade failures
If a software upgrade fails, the system runs the old software version.
55
|
|
|
|
|