Table 12 Ethernet submenu options
Option
<1> Download Application Program To SDRAM
And Run
<2> Update Main Application File
<3> Modify Ethernet Parameter
<0> Exit To Main Menu
Enter 3 in the Ethernet submenu to configure file transfer settings.
2.
Enter your choice(0-3):3
=================================<ETHERNET PARAMETER SET>===================
|Note:
'.' = Clear field.
|
'-' = Go to previous field.
|
Ctrl+D = Quit.
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name
Target File Name
Server IP Address
Local IP Address
Gateway IP Address
Table 13 Setting file transfer parameters
Field
'.' = Clear field
'-' = Go to previous field
Ctrl+D = Quit
Protocol (FTP or TFTP)
Load File Name
Target File Name
Server IP Address
Local IP Address
Tasks
Load and run a system software image in SDRAM.
If password recovery capability is disabled, this option is
not available.
Download a system software image to the current storage
medium as the main image (the file attribute is set to M).
If a main system image already exists, the M file attribute of
the original image is removed.
Configure FTP or TFTP file transfer settings.
Return to the EXTEND-BOOTWARE menu.
:test.bin
:
:test.bin
:
:192.168.0.23
:192.168.0.93
:0.0.0.0
Description
Press the dot (.), and then press Enter to clear the setting for a field.
Press the hyphen (-), and then press Enter to return to the previous field.
Press Ctrl + D to exit the Ethernet parameter settings menu.
Set the file transfer protocol to FTP or TFTP.
Set the name of the file to be downloaded.
Set a file name for saving the file in the current storage medium on the
device. The target file name must have the same suffix as the source
file.
By default, the target file name is the same as the source file name.
Set the IP address of the FTP or TFTP server. If a mask must be set, use
a colon (:) to separate the mask length from the IP address. For
example, 192.168.2.26:24.
Set the IP address of the device.
29
|
|
|