HP 6125G Release Note page 29

Option
<2> Enter Serial SubMenu
<3> Enter Ethernet SubMenu
<4> File Control
<5> Restore to Factory Default
Configuration
Tasks
Download files with XMODEM and
upgrade system software through
the console port.
If password recovery capability is
enabled, you can use any version of
the system software image for
upgrade.
If password recovery capability is
disabled, you can use only the
Release 2105 version (or higher)
for upgrade.
Download files with FTP or TFTP and
upgrade system software through
the management Ethernet interface.
If password recovery capability is
enabled, you can use any version of
the system software image for
upgrade.
If password recovery capability is
disabled, you can download only
the Release 2105 version (or
higher) for upgrade.

Display files on the current
storage medium.

Set a system software image file
as the primary or backup startup
system software image.
If password recovery

capability is enabled, you
can use any version of the
startup software.
If password recovery

capability is disabled, the
software version can only be
Release 2105 (or higher).

Delete file to free storage space.
Restore the factory-default
configuration.
If password recovery capability is
enabled, this option is not
available.
25
Reference
Upgrading system software through
the console port
Upgrading system software through
an Ethernet port
Managing files
Restoring the factory-default
configuration