Please change the terminal's baudrate to 115200 bps, press ENTER when ready.
Set the serial port on the terminal to use the same baudrate and protocol as the console port. If you
6.
select 9600 bps as the download rate for the console port, skip this task.
Select Call > Disconnect in the HyperTerminal window to disconnect the terminal from the switch.
7.
Figure 1 Disconnect the terminal connection
Select File > Properties, and in the Properties dialog box, click Configure.
8.
Figure 2 Properties dialog box
Select 115200 from the Bits per second list and click OK.
9.
43