After the load is reduced, if the STOP/RUN key switch is in the RUN position, the UPS will
automatically return to 'Inverter Operation' after a period of time. During this wait, the
following screen will be displayed:
Or if the UPS is waiting and the STOP/RUN key switch is switched to the STOP position
while the UPS is waiting, the following screen will be displayed:
If the STOP/RUN key switch remains in the STOP position when the UPS's 'wait' period is
complete, then the following screen will be displayed:
If the STOP/RUN key switch remains in the RUN position when the UPS's 'wait' period is
complete, then the following screen will be displayed:
6.22
Backup History and Fault History
Pressing the MONI and F1 keys simultaneously, for a few seconds will cause the Battery
Discharge Count screen to be displayed.
Press the F1 key to display the record relating to the first discharge event.
4200FA Installation and Operation Manual
- BYPASS OPERATION -
OUTPUT VOLTAGE=208 V
CURRENT= 100/100/100
>PLEASE WAIT
- BYPASS OPERATION -
OUTPUT VOLTAGE=208 V
CURRENT= 100/100/100
>PLEASE WAIT
- BYPASS OPERATION -
OUTPUT VOLATAGE=###V
CURRENT=100\100\100%
DATE (DAY) TIME
- UPS ON-LINE -
OUTPUT VOLTAGE= 208 V
CURRENT=100/100/99%
DATE (DAY) TIME
BATT DISCHARGE COUNT
# TIMES
> F1: FOR DETAILS
>∆/∇: TO SCROLL
BACKUP HISTORY ( 1)
#MIN##SEC VB=324V
BT *PF OL
>∆/∇: EXIT
F1: NEXT
65