Unpack The Base And Seismic Model 15/25/30 Kva Ups (Without Casters) - Toshiba 4200FA Installation And Operation Manual

2.2

Unpack the Base and Seismic model 15/25/30 kVA UPS (without Casters)

(4200FA Base, P/N C42F3FnnnXAXXN and C42F3FnnnXAXBN)
(4200FA Seismic, P/N C42F3F250XAMX0S)
Carefully inspect the UPS for shipping damage. Units shipped within North America and NAFTA are
shrink-wrapped.
1. Remove the shrink wrap from the UPS and Pallet.
2. Unbolt the UPS from the shipping pallet.
3. Use a forklift/pallet jack to lift the UPS off the pallet. Insert the
lifting forks through the lifting fork access ports.
4. Use a forklift/floor jack to position the UPS on the pre-drilled
mounting holes. See Section 2.7 for hole dimensions and
configuration.
DANGER
4200FA Installation and Operation Manual
TOP HEAVY EQUIPMENT – DO NOT tilt the UPS more than 10°
from the upright position.
Tilting the UPS more than 10° may cause crushing, trapping, or other
personal injuries and cause physical damage to internal components.
THIS EQUIPMENT WILL TIP OVER EASILY UNTIL FIXED IN
PLACE.
Side view of 15/25/30kVA UPS
Lifting fork access
11