HP 34401A User Manual page 81

Chapter 3 Features and Functions
Triggering
Trigger Delay
Front-Panel Operation (continued)
(continued)
To set the delay to 0 seconds, select the "parameter" level of the
DELAY
the right side of the display. Press
then press Menu Enter.
To select the automatic trigger delay, select the "parameter" level
of the
"units" location on the right side of the display. Press
AUTO DELAY
Remote Interface Operation:
You can use the following command to set the trigger delay.
You can use the following command to set an automatic trigger delay.
80
command. Move the flashing cursor to the "units" location on
ZERO DELAY
command. Move the flashing cursor to the
TRIG DELAY
is reached, then press Menu Enter.
AUTO DELAY
seconds
TRIGger:DELay {<
TRIGger:DELay:AUTO {OFF|ON}
until
ZERO DELAY
>|MINimum|MAXimum}
TRIG
is reached,
until