Programming Language Selection - HP 34401A User Manual

Chapter 3 Features and Functions
Remote Interface Configuration

Programming Language Selection

You can select one of three languages to program the multimeter from
the selected remote interface. The language is
shipped from the factory.
Select one of the following: SCPI, HP 3478A, or Fluke 8840A.
The language selection is stored in non-volatile memory, and does not
change when power has been off or after a remote interface reset.
There are certain restrictions to be aware of when you are selecting
the interface language (see also "Remote Interface Selection," on
page 92). The HP 3478A and Fluke 8840A/8842A languages are not
supported on the
RS-232
SCPI Language
HP 3478A Language
Fluke 8840A Language
Front-Panel Operation:
5: LANGUAGE (I/O MENU)
See also "To Select the Programming Language," on page 165.
Remote Interface Operation:
select SCPI language
L1
select HP 3478A language
L2
select Fluke 8840A language
L3
94
SCPI
interface.
HP-IB / 488 RS-232
X X
X Not allowed
Not allowed
X
when the multimeter is