HP 34401A User Manual page 16

Chapter 1 Quick Start
If the Multimeter Does Not Turn On
1
Remove the power cord. Remove the
fuse-holder assembly from the rear panel.
3
Rotate the line-voltage selector until the
correct voltage appears in the window.
100, 120, 220 (230) or 240 Vac
Verify that the correct line voltage is selected and the power-line fuse is good.
2
Remove the line-voltage selector from
the assembly.
See rear panel for proper fuse rating .
HP Part Number: 2110-0817 (250 mAT)
2110-0894 (125 mAT)
4
Replace the fuse-holder assembly in
the rear panel.
1
15