HP 34401A User Manual page 48

Chapter 2 Front-Panel Menu Operation
To Use Reading Memory
> 6 Move down a level and then across to the "
ON
Auto/Man
7 Save the change and exit the menu.
ENTER
Notice that the Mem (memory) annunciator turns on to indicate that the
multimeter is ready to store readings. Up to 512 readings can be stored
in first-in-first-out (
will turn off.
Readings are preserved until you re-enable reading memory at another
time, turn off the power, or perform a remote interface reset.
Single
8 Trigger the multimeter three times.
Single
Single
This stores three readings in memory.
Recall
Shift >
9 Use menu recall to retrieve the stored readings.
This takes you to the "
2: SAVED RDGS
) order. When memory is full, the Mem annunciator
FIFO
" command in the
SAVED RDGS
" choice.
ON
.
SYS MENU
47
2