Instructions For Lanconfig; Instructions For Webconfig - Lancom 7111 VPN Manual

LANCOM 7111 VPN – LANCOM 8011 VPN
Chapter 5: Linking two networks
5.2

Instructions for LANconfig

Perform the configuration on both routers, one at a time.
5.3

Instructions for WEBconfig

Perform the configuration on both routers, one at a time.
48
Remote Windows workgroups do not appear in the Windows Network
Neighbourhood, but can only be contacted directly (e.g. via Find
Computers).
Launch the 'Connect two local area networks' wizard. Follow the wizard's
instructions and enter the required information.
The wizard will return a message to indicate that it has all the information
it needs. Close the wizard with Finish.
After finishing the configuration of both routers, you can test the network
connection. Try to contact a computer in the remote LAN (e.g. with a
ping). The LANCOM router should automatically set up a connection to
the remote station and contact the required computer.
Under WEBconfig, the coupling of networks via VPN cannot be con-
figured using the wizard. It can only be set up in the expert configu-
ration. For details, please see the reference manual.