LANCOM 7111 VPN – LANCOM 8011 VPN
Chapter 2: Installation
ETH 1 to ETH 4
Connection status and data traffic of the four LAN ports with integrated
switch:.
off
green
green
red
WAN link
Connection status of the WAN connection:
off
green
green
green
Data traffic via the WAN connection:
WAN data
off
green
green
red
Connection status of ISDN S
ISDN status
off
green
green
red
red
22
No network device connected
constantly on
Connection to network device, no data traffic
flickering
Data traffic
flickering
Collision of packets
Not connected
blinking
Establishing first connection
flashing
Protocol negotiations
constantly on
Connection established
No network device connected
constantly on
Connection established
flickering
Data traffic (send or receive)
flickering
Collision of packets
connection:
0
Not connected or no S
blinking
Initializing D-channel (establishing contact with the connec-
tion point)
constantly on
D channel ready for use
flickering
D channel error
constantly on
Activation of D channel failed
If the ISDN status LED goes out automatically, this does not indicate
an S
bus error. Many ISDN connections and PBXs put the S
0
a power-save mode after a certain time. The S
voltage (no error message)
0
bus is automatically
0
bus into
0
Need help?
Do you have a question about the 7111 VPN and is the answer not in the manual?
Questions and answers