Table of Contents
Advertisement
If you cannot access an unconfigured LANCOM router, the problem
may be due to the netmask of the LAN: with less than 254 possible
hosts (netmask > '255.255.255.0'), please ensure that the IP address
'x.x.x.254' is located in your own subnet.
The WEBconfig main menu will be displayed:
The setup wizards are tailored precisely to the functionality of the spe-
cific LANCOM router. As a result, your device may offer different wiz-
ards than those shown here.
If you have chosen automatic TCP/IP configuration, please continue with
Step
.
If you would like to configure the TCP/IP settings manually, assign an
available address from a suitable address range to the LANCOM router.
Also set whether or not it is to operate as a DHCP server. Confirm your
entry with Apply.
LANCOM 7111 VPN – LANCOM 8011 VPN
Chapter 3: Basic configuration
35
Advertisement
Table of Contents
Need help?
Do you have a question about the 7111 VPN and is the answer not in the manual?
Questions and answers