Setting Up Wireless Scanning From A Smart Device Using Epson Smart Panel - Epson ES-C380W User Manual

5. Select the
6. Select one of the following:
• To change the Wi-Fi Direct network name (SSID), select Change Network Name and select Yes.
Select Change, then use the on-screen keyboard to enter the new network name.
Note: Your network name must be no more than 22 characters long.
• To change the Wi-Fi Direct password, select Change Password and select Yes. Use the on-
screen keyboard to enter your new Wi-Fi Direct password.
Note: Your password must be at least 8 and no more than 22 characters long.
Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will
be disconnected when you change the network name or password.
7. When entering your Wi-Fi Direct network name or password, do the following:
• To move the cursor, press the left or right arrow.
• To change the case of letters, select
• To delete the previous character, select
• To enter numbers and symbols, select 123#.
• To finish entering your network name or password, select OK.
8. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen, then enter the password shown.
Note: Make a note of the SSID and password that appear.
Computers and wireless devices can now access your scanner using the new network name and
password.
Parent topic:

Setting Up Wireless Scanning from a Smart Device Using Epson Smart Panel

You can use the Epson Smart Panel app to connect your Epson product to a wireless network or
connect your smart device directly to the product. Epson Smart Panel is available on iOS and Android
devices.
menu icon.
Wi-Fi Direct (Simple AP) Mode Setup
.
.
47