Kyocera TASKalfa 4501i Operation Manual page 468

Troubleshooting > Troubleshooting
J
Message
Job Accounting
restriction exceeded.
Job separator tray is full
of paper.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
K
Message
*
KPDL error.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
M
Message
Machine failure.
Mailbox tray is full of
paper.
Main unit inner tray is
full of paper.
Main unit upper left tray
is full of paper.
Maximum number of
scanned pages.
Memory is full.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
Is the acceptable printing count
*
restricted by Job Accounting
exceeded?
Is the acceptable storage capacity
exceeded?
Is the paper curled?
Checkpoints
―
Checkpoints
―
Is the acceptable storage capacity
exceeded?
Is the acceptable storage capacity
exceeded?
Is the paper curled?
Is the acceptable storage capacity
exceeded?
Is the acceptable scanning count
exceeded?
*
—
—
Corrective Actions
The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more.
The job is canceled. Press [End].
Remove the paper and press
[Continue]. Printing then resumes.
Check the checkpoints of "Printouts
are curled." in Solving Malfunctions
and take the corrective actions.
Corrective Actions
PostScript error has occurred. The
job is canceled. Press [End].
Corrective Actions
Internal error has occurred. Make a
note of the error code displayed on
the screen. Call service.
Remove the paper. Printing then
resumes.
Remove the paper. Printing then
resumes.
Check the checkpoints of "Printouts
are curled." in Solving Malfunctions
and take the corrective actions.
Remove the paper and press
[Continue]. Printing then resumes.
Cannot scan pages any more.
Follow the instructions on the
screen.
The memory is full and the job
cannot be continued. Press
[Continue] to print the scanned
pages. The print job cannot be
processed completely. Press
[Cancel] to cancel the job.
The process cannot be performed
due to insufficient memory. If only
[End] is available, press [End]. The
job will be canceled.
10-28
Reference
Page
—
—
page 10-20
Reference
Page
―
Reference
Page
―
—
—
page 10-20
—
—
—
—