Continuous Scan; Job Build - Kyocera TASKalfa 4501i Operation Manual

3501i/4501i/5501i operation guide rev-1 2013.6
Hide thumbs Also See for TASKalfa 4501i:
Table of Contents

Advertisement

Using Various Functions > Functions

Continuous Scan

Advanced
Copy
Setup
Scans a large number of originals in separate batches and then produce as one job. Originals will be scanned
continuously until you press [Finish Scan].
Select [On] to use continuous scanning. To use Job Build, select [Job Build]. You can set the functions that appear on
the screen during scanning.

Job Build

When [Job Build] is selected when copying or printing, the binding orientation for finished documents can be selected
from [Binding Left], [Binding Right] or [Binding Top].
The following functions can be selected during scanning.
Item
Next Copy: On Back
Next Copy: On Front
Sheet Insertion
Advanced
Custom
Send
Setup
Box
In duplex copying, prints on the back side if the next page is to be printed on the front side. Press [Next
Copy: On Back] to use this function.
In duplex copying, prints on the front side if the next page is to be printed on the back side. Press [Next
Copy: On Front] to use this function.
Inserts a blank paper in the next page. Press [Sheet Insertion] to use this function.
Functions
USB
Functions
Memory
Description
6-51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 5501iTaskalfa 3501i

Table of Contents