Kyocera TASKalfa 4501i Operation Manual page 466

3501i/4501i/5501i operation guide rev-1 2013.6
Hide thumbs Also See for TASKalfa 4501i:
Table of Contents

Advertisement

Troubleshooting > Troubleshooting
Message
Check waste toner box.
Confidential document
was detected.
*
When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
E
Message
Empty the punch waste
box.
Error occurred at
cassette #.
Error occurred at the
multi purpose tray.
F
Message
Failed to specify Job
*
Accounting.
Failed to store job
retention data.
Finisher left tray is full of
paper.
Folding tray is full of
paper.
*
When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
Is the waste toner box full?
Checkpoints
Is the punch waste box full?
Checkpoints
Is the acceptable storage capacity
exceeded?
Is the paper curled?
Is the acceptable storage capacity
exceeded?
10-26
Corrective Actions
The waste toner box is not installed
correctly. Set it correctly.
Replace the waste toner box.
The machine detects the document
guard pattern. Job is canceled.
Press [End].
Corrective Actions
Follow the instructions on the
screen. and empty the punch waste
box.
Open the cassette. Check inside
the machine and remove the paper.
Remove the paper from the multi
purpose tray.
Corrective Actions
Failed to specify Job Accounting
when processing the job externally.
The job is canceled. Press [End].
The job is canceled. Press [End].
Remove the paper. Printing then
resumes.
Check the checkpoints of "Printouts
are curled." in Solving Malfunctions
and take the corrective actions.
Remove the paper. Printing then
resumes.
Reference
Page
page 10-9
page 10-9
Reference
Page
page 10-16
Reference
Page
page 10-20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 5501iTaskalfa 3501i

Table of Contents