Garmin G3X Pilot's Manual page 82

System Overview
COLOR MODE
The Color Mode setting is used to adjust the color brightness used on the map and
synthetic vision display for day or night use.
Adjusting the color mode:
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
3) Turn or move the FMS Joystick to highlight 'Display', and press the ENT
Key.
4) Move the FMS Joystick to highlight the Color Mode field.
5) Turn the FMS Joystick to highlight 'Day', 'Night', or 'Auto'.
6) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to
return to the previous page.
Setting the Startup Page
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
3) Turn or move the FMS Joystick to highlight 'Display', and press the ENT
Key.
4) Move the FMS Joystick to highlight the Startup Page field.
5) Turn the FMS Joystick to highlight the desired Startup Page.
EIS DISPLAY LOCATION (OPTIONAL)
In Configuration Mode the 'EIS Display Location' setting can be set to one of the
following:
• AUTO—Displays the EIS Strip on the MFD, or on the PFD1 (and PFD2 if applicable)
if the MFD is not displayed.
• PFD—Always displays the EIS Strip on PFD1 (and PFD2 if applicable).
• User Selected—Enables the user to choose between 'AUTO' and 'PFD' via the
Display Setup menu.
For more information on how to enable the 'EIS Display Location' setting in
Configuration Mode refer to the G3X Installation Manual.
60
Garmin G3X Pilot's Guide 190-01115-00 Rev. K