Garmin G3X Pilot's Manual page 39

RNG Key
1
FMS Joystick
2
ENT Key
3
CLR Key
4
MENU Key
5
FPL Key
6
Direct-To Key
7
190-01115-00 Rev. K
Press to increase or decrease the viewing range of the map
Press to increase or decrease the HSI Scale on the PFD or PFD Page
Press the FMS Joystick to toggle input focus between user interaction
with the current page and the page navigation bar
Turn the FMS Joystick clockwise to access a drop down menu within the
highlighted field
Turn the FMS Joystick to change the selected value within the highlighted
field
Move the FMS Joystick (up, down, left, or right) to highlight a field
Move the FMS Joystick (up, down, left, right, or diagonally) to move the
map pointer
With the HDG or HDG/ROLL Softkey selected, press and hold the FMS
Joystick to sync to the current heading
With the appropriate autopilot mode selected, move the FMS Joystick
(up/down) to adjust the mode reference for Vertical Speed, Altitude Hold,
Target Airspeed for IAS mode (GMC 305 only), and Pitch Hold modes, or
move the FMS Joystick (left/right) to decrease the mode reference for Roll
Hold mode.
Press to confirm menu selection or data entry
Press to acknowledge messages
Press and hold to mark a waypoint
Press to cancel an entry, revert to the previous value in a data entry field
or remove menus
Press and hold to return to the default page
Press once to view the Page Menu
Press twice to view the Main Menu
Press a third time to clear the Main Menu
Press and hold to capture screen shot
Press to display the Flight Plan Page
Press to activate the Direct-To function, enter a destination waypoint and
establish a direct course to the selected destination
Garmin G3X Pilot's Guide
System Overview
17