Appendix C: Sd Card Use And Databases; Installing And Removing Sd Cards - Garmin G3X Pilot's Manual

APPENDIX C: SD CARD USE AND DATABASES

The G3X uses an SD Card for software updates, database updates, MapSource
checklist files, Chartview, Flight Data Logging, exporting Track Logs/User Waypoints,
importing/exporting Flight Plans and user-downloaded vehicles. Garmin recommends
using a 2 GB SanDisk or Toshiba SD Card.
MapSource detailed maps are available from your local Garmin dealer. Refer to
the Garmin website (www.garmin.com) for instructions on downloading software
updates. Refer to the lastest revision of the G3X Instillation Manual for software
update instructions.

INSTALLING AND REMOVING SD CARDS

NOTE: SD Cards are not waterproof. They should not be exposed to moisture
or excessive static charges, and should be stored in the case supplied with
the card.
Installing an SD Card:
1) Insert the card into the slot on the top, right, front of the bezel. Be sure the
SD Card contacts are facing the display.
2) Firmly push the card into the unit. It is not necessary to force the card.
3) The unit takes a few seconds to read the card. When the data card has
been properly installed and accepted, a summary screen noting the card
details appears. Press ENT Key to acknowledge.
190-01115-00 Rev. K
SD Card Slot
SD Card Slot(s)
Garmin G3X Pilot's Guide
Appendix C
data,
®
403