Garmin G3X Pilot's Manual page 79

Data Bar
Fields
By default, the split-screen PFD Page data bar fields and the full-screen PFD data bar
fields are set to display Next Waypoint (WPT), Bearing to Waypoint (BRG), Distance to
Waypoint (DIS), and Estimated Time Enroute (ETE). The full-screen MFD data bar fields
default to Ground Speed (GS), Ground Track (TRK), Minimum Safe Altitude (MSA), and
Vertical Speed Required (VSR). These four data fields can be changed to display any of
the Data Bar Field Options. Refer to the Annunciations and Alerts Section for a list of
available Data Bar Field options.
Changing the information shown in the data bar fields:
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
3) With 'Data Bar Fields' highlighted, press the ENT Key.
4) Move the FMS Joystick to highlight the desired 'Field'.
5) Turn the FMS Joystick to access the list of options, then turn or move the
FMS Joystick to highlight the desired option and press the ENT Key.
6) To restore defaults, press the MENU Key. With 'Restore Default'
highlighted, press the ENT Key.
190-01115-00 Rev. K
Data Bar Setup Page (Split-Screen)
Garmin G3X Pilot's Guide
System Overview
57