Garmin G3X Pilot's Manual page 281

Enabling/disabling traffic on the Synthetic Vision display:
1) From the full-screen PFD and/or the split-screen PFD Page, press the MENU
Key.
2) Move the FMS Joystick to highlight the 'TRAFFIC' field.
3) Turn the FMS Joystick to highlight 'On' or 'Off'.
Displaying Traffic information using the map pointer:
1) With traffic displayed on the Map Page, press the FMS Joystick. The Map
Pointer is activated.
2) Move the FMS Joystick to highlight the desired traffic.
Traffic
Information
Traffic
Symbol
D
eDiCateD
NOTE: Traffic alerts and altitude filters can only be changed on the dedicated
Traffic Page (TRF). If the Traffic Page (TRF) is configured off voice alerts are
enabled and the altitude filter is automatically set to 'Normal'
Displaying/Removing the Traffic Page:
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
3) Turn or move the FMS Joystick to highlight 'Display', and press the ENT
Key.
4) Move the FMS Joystick to highlight the Traffic Page field.
5) Turn the FMS Joystick to highlight 'Show' or 'Hide'.
6) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to
return to the previous page.
190-01115-00 Rev. K
Traffic (Map Page)
t p (trF)
raFFiC age
Garmin G3X Pilot's Guide
Hazard Avoidance
Traffic Range
and Altitude
Separation using
Map Pointer
Map
Pointer
259