Garmin G3X Pilot's Manual page 293

Hide thumbs Also See for G3X:
Table of Contents

Advertisement

TRAFFIC
WARNING: Intruder aircraft at or below 500 ft. AGL may not appear on the
Synthetic Vision display or may appear as a partial symbol.
Traffic symbols are displayed in their approximate locations. Traffic symbols are
displayed in three dimensions, appearing larger as they are getting closer, and smaller
when they are further away. Traffic within 250 feet laterally of the aircraft will not be
displayed on the Synthetic Vision display. Traffic symbols and coloring are consistent
with that used for traffic displayed on the Inset Map or Map Page. If the traffic altitude
is unknown, the traffic will not be displayed on the Synthetic Vision display. For
more details refer to the Traffic Information Service (TIS-A) discussion in the Hazard
Avoidance section. Arrows are depicted on the traffic message if traffic is outside the
Synthetic Vision field of view.
Enabling/disabling traffic on the Synthetic Vision display:
1) From the full-screen PFD and/or split screen PFD Page, press the MENU
Key.
2) Move the FMS Joystick to highlight the 'TRAFFIC' field.
3) Turn the FMS Joystick to highlight 'On' or 'Off'.
Traffic
Synthetic Vision Traffic (PFD)
190-01115-00 Rev. K
Traffic
Traffic Outside the Field of View
Garmin G3X Pilot's Guide
Additional Features
271

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents